How To Articles
1: Collect SMDR logs on the Mitel Networks 3300 ICP.
There are two solutions for collecting SMDR logs from the Mitel Networks 3300 ICP other than the printer port.
The SMDR logs can be outputted from the IP console MN5550
The SMDR logs can be outputted
2: How to pull an external forwarded call back to internal voice mail
How to pull an external forwarded call back to internal voice mail
3: Using OPS Manager for NuPoint Messenger Voicemail administration
Using OPS Manager for NuPoint Messenger Voicemail administration
4: How to identify the platform types: ie. MX, MXE, AX
This document is to provide a way to identify the controller type via either maintenance command or via bootup sequence from RTC Shell
5: How to use the Loop Start measuring tool on the 3300 ICP
How to use the Loop Start measuring tool on the 3300 ICP
6: How to Capture 802.1q Frame with Ethereal
How to Capture 802.1q Frame with Ethereal
7: Associating a single DID number with two Menu Node Mailboxes for separate Day and Night greetings
Associating a single DID number with two Menu Node Mailboxes for separate Day and Night greetings
8: Access the 3300 RTC VXWorks Shell Remotely
If you need to access the 3300 RTC shell from a remote location, you will need to use a Secure Telnet Client such as PuTTY set to RAW mode & port 2002.
9: Troubleshoot potential DSP hardware problems
Although defective DSP's are not a common occurrence, the following document describes the symptoms and corrective action to be taken in the unlikely event a defective DSP card is installed on the 330
10: Setup and enable SDS
Enable the SDS feature on each element that will be included in the network or cluster. SDS is disabled by default. To enable SDS on a 3300 ICP system:
Page 1 of 3
[1] [2] [3]
